hdmi? port hdmi 1.3 - esd & overcurrent protection MF-FSMF020X-2 cdsot236-0504 lc cddfn10-0524p cddfn10-0524p d2+ gnd d2- d1+ gnd d1- d0+ gnd d0- ck+ gnd ck- ce_remote nc ddc_clk ddc_da t gnd +5 v out hotplug_det d2+ d2- d1+ d1- d0+ d0- ck+ ck- ce remote ddc_clk ddc_d at hotplug_det 5 v te schematic above illustrates the application protection and does not constitute the complete circuit design. customers should verify actual device performance in their specifc applications. cddfn10-0524p cdsot236-0504lc MF-FSMF020X-2 copyright? 2011 ? bourns, inc. ? 8/11 ? e/cpk1023 ? portnote is a registered service mark of bourns, inc. bourns and multifuse are registered trademarks of bourns, inc. in the u.s. and other countries. hdmi is a registered trademark of its owner. solution products asia-pacifc: tel +886-2 256 241 17 fax +886-2 256 241 16 bourns? portnote? solutions provide protection recommendations for typical port threats. for more information, go to: www.bourns.com or email: protection@bourns.com americas: tel +1-951 781-5500 fax +1-951 781-5700 europe: tel +41-(0)41 768 55 55 fax +41-(0)41 768 55 10 compliance iec 61000-4-2 level 4 (8 kv / 15 kv) alternate recommendations other portnote? solutions: ? hdmi: hdmi 1.4 - esd & overcurrent protection beneft tis solution provides iec 61000 level 4 esd protection without impairing the hdmi signal. objective hdmi 1.3 interfaces are 3.3 v diferential digital signals with single-link bandwidths up to 340 mhz (10.2 gbit/s). as usage of hdmi ports increases, hdmi ports face a growing threat of esd damage. solution 2 tvs diode arrays: cddfn10-0524p 1 tvs diode array: cdsot236-0504lc 1 multifuse? pptc: MF-FSMF020X-2 pn-designkit 11 design kit
|
